ipGateway
Request For Information
To allow an ipGatway to exist on a LAN, the following information is required from the
network administrator:
IP Address of the ipGateway
on the LAN.
Subnet Mask for the LAN the
ipGateway will be connected
to.
The Default Gateway for the
LAN the ipGateway will be
connected to.
The IP Address of the SMTP
server the ipGateway will use
to send emails.
SMTP Username
(MAX 49 characters)
The Username the
ipGateway will use for SMTP
authentication.
SMTP Password
(MAX 15 characters)
The Password the
ipGateway will use for SMTP
authentication.
Email Address
(MAX 49 characters)
The Email Address the
ipGateway will use in the
‘FROM’ field when sending
an email.
Has the existing email server
been setup to allow the
ipGateway to relay through
it?