8. Configure
Provides access to menus to set-up passwords, relay activation, temp scale, display contrast, flow
switch, inputs, history time stamps, factory set-up and system information.
INPUTS- This screen shows what digital
inputs are available on the unit such as water
meters, flow and drum level alarms.
CONTRAST- This screen allows for adjusting
the display contrast.
FLOW SW- Defines a flow switch to be open
or closed with flow.
FACTORY- A factory only menu
TEMP SCALE- Set between Celsius or
Fahrenheit
>CONFIGURE<
PASSWORD CONTRAST
RELAYS TEMP SCALE
INPUTS NETWORK
HISTORY SYS INFO
FLOW SW FACTORY
HISTORY – Sets the history time stamp
interval.
SYS INFO- Tells unit software specifics.
8.1 Password
>CONFIGURE PASSWORDS<
ADMIN PASSWORD
USER PASSWORD
USER SET UP
ADMIN PASSWORD – The administrator
password gives access to all menus except
factory set up.
USER PASSWORD – The user password
allows the user to access HOME menus that
are made available in USER SET UP.
8.2 Relays
>CONFIGURE RELAYS<
RELAY 1
RELAY 2
RELAY 3
RELAY 4
RELAY 5 MORE RELAYS
CONFIGURE RELAYS – This menu lets
you choose what available function (timer 1,
conductivity, alarms etc…) activates a
particular relay. When you select a relay a
pop-up screen appears with a list of all
available activation functions to arrow
through.
8.3 Network
NETWORK – This menu is used for setting
up the remote WebAdvantage
communications and is covered in a
separate manual.
>CONFIGURE NETWORK<
IP ADDRESS HTTP REMOTE
IP MASK FTP
GATEWAY RESET
SERVER
HTTP LOCAL
18
To Next Page
Loading...
