Advantech Adam 4000 Series - Page 119

Chapter 4 Command Set 4-35
Chapter 4
Command Syntax Command Name Command Description Page No.
@AAPN(data) Set Initial Count
Value of Counter N
Sets the initial count value of the
module for counter 0 or counter 1
4 203
@AAGN Read Initial Count
Value of Counter N
Reads the initial count value of counter
0 or counter 1
4 204
@AAEAN Enable Alarm of
Counter N
Enable alarm for the specified counter 0
or counter 1
4 205
@AADAN Disable Alarm of
Counter N
Disable alarm for the specified counter
0 or counter 1
4 206
@AAPA(data) Set Alarm Limit
Value of Counter 0
Download the alarm limit value for
counter 0 of the specified module
4 207
@AASA(data) Set Alarm Limit
Value of Counter 1
Download the alarm limit value for
counter 1 of the specified module
4 207
@AARP Read Alarm Limit
Value of Counter 0
Ask the module to return the alarm
limit value of counter 0
4 208
@AARA Read Alarm Limit
Value of Counter 1
Ask the module to return the alarm
limit value of counter 1
4 208
@AADO (data) Set Digital Output
Values
Set the values of the module’stwo
digital outputs (ON or OFF)
4 209
@AADI Read Digital Output
and Alarm Status
Ask the module to return the status
state of its two digital outputs and the
status of its alarm.
4 210