Advantech Adam 4000 Series - 4.4.5 Excitation Voltage Output Command Set

Chapter 4 Command Set 4-119
Chapter 4
4016
Command
Syntax
Command Name Description
I/O
module
$AA6 Get Excitation
Voltage Output
Value
Returns either last value sent to specified
module by $AA7 command, or start-up
output voltage.
4016
$AA7 Excitation
Voltage Output
Direct output excitation voltage data to a
specified module
4016
$AAS Start-up Voltage
Output
Configuration
Stores a default value in a specified module.
The output value will take effect upon
startup.
4016
$AAE Trim Calibration Trims specified module a number of units
up/down
4016
$AAA Zero Calibration Tells the module to store parameters for
zero calibration
4016
$AAB Span Calibration Tells the module to store parameters for
span calibration
4016
4.4.5 Excitation Voltage Output Command Set