EKI-1521/1522/1524 User Manual 54
4.1.3 Manual Direct Mapping Virtual COM Port
Click the button on the Quick Took area, you can add a target by selecting
the Device Type and inputting the IP address without physically connecting the serial
device server to the network.
4.1.4 Remove the Virtual COM Port
If you want to remove the virtual COM port, you can remove them one by one or
group remove ports.
Individually Remove
Right click on COM port you have mapped and select “Remove This Port”.
Group Remove Port
Right click on Virtual Com Ports on Device Server List Area and select “Group
Remove Port”, you can choose which ports you want to remove.
To Next Page
Loading...
Need help?
General
