Advantech ICAM-520 Series User Manual

19 ICAM-500 User Manual
Chapter 4 Getting Started
4.4 Start Acquisition
1. Follow the instruction of web UI to select the “New Project” bottom to create a
new project for ICAM-500 configuration.
Figure 4.3 Add new project
2. Fill in the content of new project, output resolution and select the trigger mode
then confirm to save project, select the project just created, click the “next” but-
ton and click the “play” button to start the acquisition.
Figure 4.4 Content of new project

Advantech ICAM-520 Series Specifications

General

Brand	Advantech
Model	ICAM-520 Series
Category	Digital Camera
Language	English