Advantech ICAM-520 Series User Manual

35 ICAM-500 User Manual
Chapter 5 Troubleshooting
2. Copy BSP file (Ex: ICAM-500_Nano_4.5.1_1.1.10.5_MassFlash.tbz2) to Host
PC
3. Enter following command on Host PC to un-tar BSP image file:
tar –vxjf ICAM-500_Nano_4.5.1_1.1.10.5_MassFlash.tbz2
4. Press and hold the Reset and Recovery buttons on the ICAM-500 at the same
time.
5. Release the Reset button first.
6. Release the Recovery button after waiting for 3 seconds.
7. Enter the “lsusb” command on the Host PC.
8. ID 0955:7f21 Nvidia Corp. means device is in recovery mode.
9. Enter the “sudo su” command on the Host PC to get the administer authority.
10. Enter the following command on the Host PC to find the BSP image file.
“cd ICAM-500_Nano_4.xxxxxx_MassFlash/ xxxxx folder
11. Enter the “./nvmflash.sh” command on the Host PC.
12. After 10 to 20 minutes, you can see the success message as shown below on
Host PC and the ICAM-500 will automatically restart.

Advantech ICAM-520 Series Specifications

General

Brand	Advantech
Model	ICAM-520 Series
Category	Digital Camera
Language	English