2. Hardware Functionality 2.6 LED Status Indication
2.6 LED Status Indication
There are LED indicators on the front panel of the router to provide router status information. Moreover,
ETH connector, has two additional LEDs providing information about the port status.
Caption Color State Description
PWR Green
Green
Green
On
Blinking
Fast blinking
The router is booting up.
The router booted up and is ready.
The router firmware is being updated.
ETH0
ETH1
Green
Green
On
Off
Selected 100 Mbps bit rate
Selected 10 Mbps bit rate
ETH0
ETH1
Orange
Orange
Orange
On
Blinking
Off
The network cable is connected.
Data transmission
The network cable is not connected.
Table 8: LED Status Indication
ICR-2701 Hardware Manual (preliminary version) 15