MIC-770 V2 User Manual 66
3.2.3.7 SATA and RST Configuration
Figure 3.45 SATA and RST Configuration
SATA Controller(s)
"Enable or Disable" SATA controller.
SATA Mode Selection
This can be configured as "RAID or AHCI".
Port 1~4
"Enable or Disable" SATA port 1~4.
Hot Plug
"Enable or Disable" SATA Hot-Plug.
Spin Up Device
"Enable or Disable" spin up device.
SATA Device Type
To identify the SATA that is connected to a "Solid State Drive or Hard Disk
Drive".