EasyManuals Logo
Home>Advantech>Industrial Equipment>MIC-770 V2

Advantech MIC-770 V2 User Manual

Advantech MIC-770 V2
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
MIC-770 V2 User Manual 80
7.1 Introduction
The MIC-770 V2 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes
(Intel
®
I219LM (LAN1) and I210IT (LAN2)) that offer bandwidth of up to 500 MB/sec,
eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at
1000 Mbps.
7.2 Features
10/100/1000Base-T Ethernet controller
10/100/1000Base-T triple-speed MAC
Full duplex at 10, 100, or 1000 Mbps and half duplex at 10 or 100 Mbps
Wake-on-LAN (WOL) support
PCIe x1 host interface
7.3 Installation
The integrated Intel
®
gigabit Ethernet controller supports all major network operating
systems. However, the installation procedure varies with different operating systems.
In the following sections, refer to the one that provides the driver setup procedure for
the operating system you are using.
7.4 Windows Driver Setup
Enter the Advantech support website, then search product MIC-770 V2. You can see
"LAN" driver inside.
Note! Before installing the LAN drivers, make sure the CSI utility have been
installed on your system. See Chapter 4 for information on installing the
CSI utility.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Advantech MIC-770 V2 and is the answer not in the manual?

Advantech MIC-770 V2 Specifications

General IconGeneral
BrandAdvantech
ModelMIC-770 V2
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals