11 PCI-1756 User Manual
Chapter 2 Installation
2.2 Driver Installation
We recommend you install the driver before you install the PCI-1756 card into your
system, since this will guarantee a smooth installation process.
The Advantech DAQNavi Device Drivers Setup program for the PCI-1756 card is
included in the companion DVD-ROM that is shipped with your DA&C card package.
Please follow the steps below to install the driver software:
1. Insert the companion DVD-ROM into your DVD-ROM drive.
2. The Setup program will be launched automatically if you have the autoplay func-
tion enabled on your system. When the Setup Program is launched, you will see
the following Setup Screen.
Figure 2.1 Setup Screen of Advantech Automation Software
3. Select the DAQNavi option to install.
4. Select the Individual Driver option.
5. Select the PCI series and the specific device then follow the installation instruc-
tions step by step to complete your device driver installation and setup.
6. Back and select the DAQNavi SDK to install the Advantech Navigator.
Note! If the autoplay function is not enabled on your computer, use Windows
Explorer or Windows Run command to execute autorun.exe on the com-
panion DVD-ROM.
To Next Page
Loading...
