Advantech ROM-5620 - Introduction; Device Tree Source File Select for ROM-5620

ROM-5620 User Manual 34
5.1 Introduction
ROM-5620 platform is preloaded with the Yocto 2.5 based embedded O.S. (Linux
kernel starting from 4.14.98). It contains all system-required shell commands and
drivers for the ROM-5620 platform. Advantech does not offer an IDE developing envi-
ronment in ROM-5620 BSP. Users can evaluate and develop environments using
Ubuntu 16.04 LTS.
The purpose of this chapter is to introduce users to software configuration for ROM-
5620 to enable efficient application(s) development.
"For detailed operation, please refer to Yocto Linux BSP Ver.9 User Guide for iMX8
series form Wiki page:
http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_L-
BV9_User_Guide
5.1.1 Device Tree Source File Select for ROM-5620
5.1.1.1 Display
A. LVDS
1. g070vw01
adv-imx8mxp-rom5620-a1.dtb
2. g150xgel05
adv-imx8qxp-rom5620-a1-lvds-chimei.dtb
3. g215hvn01
adv-imx8qxp-rom5620-a1-lvds-dual.dtb
B. LVDS to HDMI
adv-imx8qxp-rom5620-a1-hdmi-bridge.dtb
C. DSI to HDMI
adv-imx8qxp-rom5620-a1-hdmi-bridge.dtb
D. DSI
1. auog101uan02
adv-imx8qxp-rom5620-a1-auog101uan02.dtb
5.1.1.2 M.2 SDIO
Adjust CN43~CN48
adv-imx8qxp-rom5620-a1-m2-sdio.dtb
5.1.1.3 2nd QSPI
adv-imx8qxp-rom5620-a1-qspi-b.dtb