SIMB-982 User Manual 14
1.9 System Memory
SIMB-982 has two 288-pin memory sockets for DDR4 1866/2133 MHz memory mod-
ules with maximum capacity of 32 GB (Maximum 16 GB for each DIMM). SIMB-982
only supports
non-ECC DDR4 memory modules.
Please note that SIMB-982 does NOT support registered DIMMs (RDIMMs).
1.10 Memory Installation Procedures
To install DIMMs, first make sure the two handles of the DIMM socket are in the
“open” position. i.e. The handles lean outward. Slowly slide the DIMM module along
the plastic guides on both ends of the socket, and then press the DIMM module right
down into the socket, until you hear a click. This is when the two handles have auto-
matically locked the memory module into the correct position of the DIMM socket. To
remove the memory module, just push both handles outward, and the memory mod-
ule will be ejected by the mechanism in the socket.
1.11 Cache Memory
The SIMB-982 supports a CPU last Level Cache.
The built-in second-level cache in the processor yields much higher performance
than conventional external cache memories.
1.12 Processor Installation
The SIMB-982 is designed for LGA1151, Core i7/Core i5/Core i3, Pentium,
Celeron processor.
To Next Page
Loading...
Need help?
General
