Advantech SIMB-982 - Jumpers and Connectors

SIMB-982 User Manual
4
1.4 Jumpers and Connectors
Connectors on the SIMB-982 motherboard link it to devices such as hard disk drives
and a keyboard. In addition, the board has a number of jumpers used to configure
your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.
Table 1.1: Connector and Header List
Description Part Reference
1
VGA connector VGA1
2 HDMI connector HDMI1
3 DisplayPort connector DP1
4
LAN connector LAN12
5
COM2 connector COM2
6 DVI-D connector DVI-D1
7
9 HD Analog Audio Interface connector AUDIO1
11 SPDIF audio pin header SPDIF_1
12
Front panel audio pin header
FP_AUDIO1
13 Audio amplifier output pin header JAMP1
14 PCIEx16 slot PCIE_SLOT1
15 PCEx1 slot PCIE_SLOT2
16 PCIEx4 slot PCIE_SLOT3
17 PCI slot PCI1
18 PCI slot PCI2
19 PCIEx1 slot PCIE_SLOT4
23 Dual port USB2.0 pin header (Q170) USB1314
24
USB3_56
25 Serial ATA interface connector SATA1
28 Serial ATA interface connector SATA4
29 Serial ATA interface connector (O170) SATA5
30
COM port3~6 box header COM345634
Serial ATA interface connector (Q170) SATA6
8
USB3.0 connector USB3_1234
10 Case-open pin header JCASE1
20 PCI slot PCI3
21 USB2.0 type-A connector USB7
22 Dual port USB2.0 pin header (Q170) USB1112
26 Serial ATA interface connector SATA2
27 Serial ATA interface connector SATA3
31
Serial ATA interface connector (Q170) SATA7
32
Serial ATA interface connector (Q170) SATA8
COM1 box header
COM133
RJ45+USB2.0 stack connector (Q170)
USB2.0 stack connector (H110)
LAN3_USB910
USB910
Dual port USB3.0 box header (Q170)
Dual port USB2.0 box header (H110) USB3_56