USM-110 User Manual 38
Figure 5.2 Client Setup Page
Server Configuration
1. Open the server system interface installed on the server device. Select the Cli-
ent Device option in the dropdown menu, then click the [New] button at the top
right corner of the interface (as shown in Figure 5.3).
Figure 5.3 Server Configuration
Device Edit Page (Figure 5.4)
2. Input the device name into the [Name] field.
3. The [Client ID] field should be based on the client system settings.
– Option 1. If [Use Custom ID] is selected, input the [Custom ID] value set in
the client system.
– Option 2. If [Use Custom ID] is not selected, input the [Client ID] value set in
the client system.
4. Click [Save & Exit].
To Next Page
Loading...
