37 USM-110 User Manual
Chapter 5 WISE-PaaS/SignageCMS
5.2 WISE-PaaS/SignageCMS Configuration
Client Configuration
1. Power on the device and ensure network connectivity. Open the PSClient app.
2. Navigate the mouse cursor to the left of the screen to access the Client Setup
menu (as shown in Figure 5.1).
Figure 5.1 Client Configuration
Client Setup Page (Figure 5.2)
3. Input the IP address of the server in the [server] field.
4. Make note of the [Client ID] or [Custom ID] (if the “Use Custom ID” checkbox is
selected*).
5. Click the “Silent Installation” checkbox to enable automatic updates.
*The [Client ID] or [Custom ID] is required for the [Client Device] field in the server
system settings.