( 23 )
FREE ARM SEWING
Remove the support bed as illustrated which easily converts from a flat bed to free arm.
Convenient for sewing pant legs, sleeves and cuffs, etc.
CONVERTIBLE PRESSER FOOT
The special presser foot, is set for normal overlock
with the letter N adjacent to the vertical screw at front
of presser foot. When you need to sew a rolled edge,
simply loosen the large screw slightly and move the
finger that protrudes from left side of foot forward until
is stops, then re-tighten the screw. The letter R will
now be adjacent to screw.
Free arm
Support bed
Finger
R
N
To Next Page
Loading...
