40
Connecting a digital audio receiver
If you would like to use 5-channel audio transmis-
sion (Dolby Digital Sound/AC3), you must connect
your digital audio receiver to the DVB-S2/HD 4546
receiver's coaxial output.
The coaxial cable is not included in delivery.
Connect the coaxial cable to the „COAXIAL“ port
at the receiver.
Connect the coaxial cable to the digital audio
receiver.
Attention!
Note the specifications for connecting in the ope-
rating instructions supplied with your digital audio
receiver.
Connection schematic
AEG_BDA_DVB-S2_4546_GB.qxd:CL_BDA_DVB_T776_GB_ka.qxd 22.01.2010 11:33 Uhr Seite 40
To Next Page
Loading...
