23
Cranking Test
1.
cranking system.
2. Start the engine of your vehicle.
Fig. 4: Cranking Test
No. Function
20 Help - Test description
21
Displays the cranking current value
Green = voltage good
Red = voltage poor
22 Voltage graph
automatically test the cranking system and save
the results. A starting cranking voltage of 9.6 V and
higher is typically normal. If the cranking voltage is
less than 9.6 V, it is too low. If the cranking voltage
is too low this may be due to battery ageing, low
power, or a starter fault.
20
21
22
System Setup
Fig. 3: System Setup
Nr. Funktion
14
Green = on
The default is to send a maximum of one mes-
sage every 6 hours, however the frequency can
be changed.
15
Green = on
The default is to send a maximum of one mes-
sage every 6 hours, however the frequency can
be changed.
16
Bluetooth settings
Tap here to open the Bluetooth device settings.
Here you can scan for nearby devices and view
previous connections. Changing the Bluetooth
device name.
17
Installation Tutorial
will replay the app demo.
18
Firmware Update interface:
Use to view the hardware version and update the
19 Current app version number
14
15
16
17
18
19
To Next Page
Loading...