AEG COMPETENCE 770 E-mp - Switching on the Electronic Timer

UH2-2 6/91 GB/EU
As soon as!am connected to the mains supply (and also after each
power failure), the display in my electronic timer flashes 00.00.
‘Only when you have set me to the corresponding time ofdayam
| ready to operate.
96.1
- Press knob E [©], which will retract for operation (but can be
pressed back in if not needed).
- Important! Appliances with an enamelled control panel have
no retractable timer knob.
- Press buttons C[bJand DG at the same time, hold them in posi-
tion, and set the actual time of day with my knob E (@].
The time of day appears for you in display F.
Only now is my oven ready to operate.
Switching on
the electronic
timer for the
oven only
You should
also be aware
of the
following
Setting the
time of day
You should
also be aware
of the
following
59