AEG COMPETENCE 770 E-mp - Page 24

UBA2-2.5/01 GEYEU
95.1
- Set my heating mode switch to the corresponding symbol and
the oven temperature switch to the necessary temperature.
- Press my button C|bi, hold it depressed, and enter the required
duration with knob ES). When my button C is released, the time
of day reappears in display F.
— The word “AUTO” shows for automatic operation.
My oven switches immediately on and automatically off after
the elapsed duration.
At the end, an audible signal sounds for around two minutes.
You can prematurely cancel it by pressing my button C
When the roasting or baking process has ended, set my heating
mode switch to 0 and the oven temperature switch to the Off
position.
- My oven is ready to operate again only when the word
“AUTO” in the display has been cancelled. To do this, press
both my buttons C and D.
You can request ihe remaining duration and end at any time
during the automatic sequence. To do this, press either my button C
orD
Ifyou wantto cancel automatic operation, press my button C
set my heating mode and oven temperature switches to th
Off position respectively.
How to
program:
automatic
switch-off of
my oven
You should
also be aware
of the
following
73