AEG DDLE LCD 18 - English

20
1. Operating instructions ___________________________________________________________________ 24
1.1 Equipment description ___________________________________________________________________ 24
1.2 Vital facts in brief ______________________________________________________________________ 24
1.3 Safety information ______________________________________________________________________ 24
1.4 Important information ___________________________________________________________________ 24
1.5 DHW output ___________________________________________________________________________ 25
1.6 Recommended settings when using a thermostatic valve ________________________________________ 25
1.7 First aid in case of faults __________________________________________________________________ 25
1.8 Maintenance and care ____________________________________________________________________ 25
1.9 Operating and installation instructions ______________________________________________________ 25
2. Installation instructions __________________________________________________________________ 26
2.1 Equipment layout
________________________________________________________________26
2.2 Brief description ________________________________________________________________________ 26
2.3 Important information ___________________________________________________________________ 26
2.4 Instructions and regulations _______________________________________________________________ 26
3. Standard Installation
for contractors _____________________________________________________ 28
3.1 General installation information ____________________________________________________________ 28
3.2 Installation site _________________________________________________________________________ 28
3.3 Preparing the device installation ___________________________________________________________ 28
3.4 Fitting the mounting bracket
________________________________________________________28
3.5 Equipment installation
_____________________________________________________________28
3.6 Water connection
________________________________________________________________28
3.7 Power supply ___________________________________________________________________________ 29
3.8 Completing the installation _______________________________________________________________ 29
3.9 Commissioning
(onlybyaqualiedcontractor) _________________________________________29
4. Alternative installation methods for contractors _______________________________________________ 30
4.1 Powersupply–unnishedwalls-below
________________________________________________30
4.2 Powersupply–nishedwalls ______________________________________________________________ 30
4.3 Priority control
__________________________________________________________________30
4.4 Undersink installation, water connections from the top __________________________________________ 30
4.5 Temperature limit _______________________________________________________________________ 30
4.6 Tapsfornishedwalls ____________________________________________________________________ 30
5. Specicationandapplicationareas
for contractors _______________________________________31
5.1 Specication ___________________________________________________________________________ 31
5.2 Application areas________________________________________________________________________ 31
6. Troubleshooting
by the user ________________________________________________________32
7. Troubleshooting by the contractor ___________________________________________________33
8. Special accessories ______________________________________________________________________ 34
9. Customer service and warranty _____________________________________________________________ 36