AEG ME09 - Front label data overview; Product Denomination to Manufacturing Date; TOOLS needed for installation; Required Hand Tools

ᆅჾ
ۉጱྃഗ
໮
޹
֪๬
޹୤
য়ߢ༵๖ణ୤
INTRO
TRIP UNIT
LOCKS ACCESSORIES TESTS APPENDIX
1.1-07
ᆅჾࡀ߭Ҿጎ֡ፕۉጱྃഗ
܏ୟഗ
BREAKER
2/!ׂ೗ఁ׬
3/!ཉႚஓ
4/!ኸ๖ݴ܏ీ૰
5/!ܮۨۉუ
6/!ܮۨۉୁ
7/!ණኤࢅՔጚ
8/!܌ୟݴ܏ຕ
9/!ิׂන೺
NF1:ဣଚگუഘ܏ୟഗ
2
3
4
5
6
7
8
9
՗
2/2/5!௬ӱՔധຕ߁ຎǖ
1.1.4 Front label data overview:
1.1.5 TOOLS needed for installaƟon
1. Product DenominaƟon
2. Bar code
3. Colour Code indicaƟng InterrupƟon Tier
4. Voltage RaƟngs
5. Current RaƟngs
6. CerƟĮcaƟons & Standards
7. Short Circuit InterrupƟon data
8. Manufacturing Date
2/2/6!Ҿጎ໯Ⴔ߾
՗!2/2!ଚକҾጎĂ֡ፕࢅྼࢺ!6111.7511B!
܏ୟഗ໯ՂႴڦ๮߾߾ă
Table 1.1 provides a list of the hand tools required to install,
operate and maintain the 5000-6400A Circuit Breaker.
Table 1.1: Required Hand Tools
՗!2/2ǖՂႴڦ๮߾߾
߾ఁ׬0ࠀీ
ಇഭ!)HVOJ*ǖ
ᆩᇀൽူಇ๕ةۅ৊ႜֱă
அີژDŽ9!nn!ᅃጴ๕Džǖ
ᆩᇀገۯ؃ཉࠓڔӱدۯጎዃă
ాୃঙӮ๮!)6!nn*ǖ
ᆩᇀָႂ௶ࢷቸ৊ႜֱࢅྼࢺăᆩᇀָႂ
ۙবࠦۨ๕ࢅᅎۯ๕௶ࢷةۅă
ాୃঙӮ๮!)5!nn*ǖ
ᆩᇀָႂۉ֡ፕഗҾጎஅۤă
ࠅ዆֪ဤࡀǖ
ᆯᇀֱ௶ࢷةۅဤă
அີژ!)!༫!*ǖ
ᆩᇀָႂႁࢅۉጱፇҾጎஅۤăᆩᇀ
ದ၍૶থڟޤዺةۅথ၍܋ă
அີژ!)!༫!*ǖ
ᆩᇀָႂമ௬ӱҾጎஅۤă
Tool Name / FuncƟon
Cluster pliers (GUNI):
To remove cluster contacts for inspecƟon.
Screwdriver (8 mm Ňat):
To operate racking aperture shuƩer drive.
Allen key (5 mm):
To remove arc chutes for inspecƟon and
maintenance. To remove or adjust Įxed and
moving arcing contacts.
Allen key (4 mm):
To remove motor operator mounƟng screws.
Metric feeler gauges:
To check arcing contact gaps.
Pozidrive screwdriver (#2):
To remove mechanical and electronic
component mounƟng screws. To connect
wiring
to secondary contact terminals.
Pozidrive screwdriver (#3):
To remove front cover mounƟng screws.
گუ዇ీ܏ୟഗ NF1: