EasyManua.ls Logo

AEG OL8000 - Introduction and Product Details; Intended Use; Important Product Information; Scope of Delivery

AEG OL8000
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35 GB
Introduction / Security
1 Storage bag
1 Operating manual
Parts description
1
LC-Display
2
Button „LÖSCHEN / ERASE“
3
Button „LESEN / READ“
4
Connection cable with OBD II-plug
Technical Data
Article-No.: 97131
Operating Voltage: 12 V
via OBD
II–socket
Storage Temperature: 20 to 70 °C
(04 to 158 °F)
Operating Temperature: 0 to 50 °C
(-32 to 122 °F)
Display: LC-Display with back-
light illumination
Weight: approx. 250 g, incl.
cable
Dimensions: approx.
13,8 x 9,0 x 2,5 cm
(W x H x D)
Security
General safety
guidelines
WARNING!
Read all safety guidelines and
instructions. Omissions regarding the compliance
to safety guidelines and instructions can cause
electrical shock, fire and/or serious injuries.
Keep all safety guidelines and instructions for
future reference.
J
DANGER OF ACCIDENT AND LIFE
FOR INFANTS AND CHILDREN!
Never leave children unsupervised
with the packing material. There is danger of
suffocation.
J This device is not intended for use by persons
(including children) with reduced physical,
sensory or mental abilities or lack of experi-
ence and/or lack of knowledge unless they
are supervised by a person responsible for
their security or received instructions from
this person, how the equipment is to be
used. Children should be supervised, in order
to guarantee that they do not play with the
device.
J Liquid of any kind shall never penetrate the
device. Mortal danger exists by electrical
shock otherwise and danger of the damage.
J Do not let the device get into the hands of
children and store it inaccessible for chil-
dren. Small parts could be swallowed by
children and lead to death by suffocation .
Children could hurt themselves when using
this device.
J Keep the device away from children. Children
do not understand or recognise the possible
dangers in handling electrical devices.
J ATTENTION! DANGER TO LIFE AND DAN-
GER OF INJURY, DANGER OF DAMAGE.
Secure the vehicle to prevent rolling before
checking it with the OBD II Diagnostic
Device OL 8000.
Always engage the hand-/ parking brake and
take care that it is not in gear during the
check. An automatic gear box must be set to
the „Park-Position“(P) and the hand-/ park-
ing brake must be engaged.
J Take care that the device is always stored in
a secure place. Do not expose the device to
oils, grease, dampness, rain or wet ambient
conditions. Avoid that water or other liquids
run over the device or drip on it. Penetrating
water causes an electrical short circuit and
can damage the device or the vehicle.
J Take care, that the device and the plugs are
free of dampness. Never connect the device
to the vehicle when hands are wet.
J Do not expose the device to direct sun light.
J Route the connecting cable in such a way,
that no one trips up and the cable gets
damaged.

Table of Contents