40 GB
Start-up / Operation / Maintenance and care / Service / Warranty / Disposal
Furthermore, this menu function allows a new
connection to the vehicle to be made.
j Select the menu »MENU 5.RESCAN« by
pressing the button LÖSCHEN / ERASE
2
j Then press the button LESEN / READ
3
.
j Press the button LÖSCHEN / ERASE
2
, to go
back to the main menu.
Vehicle-diagnosed fault (DTC –
Diagnosed Fault Code), install CD
The information to the separate error codes can
be taken from this operating manual, from the
chapter „error code list. The most important
1000 error codes are listed there.
The enclosed software-CD covers most of the
error codes. You will receive information on more
recent and some special error codes (mainly „B“,
„C“ and „U“) either via internet search engines
(Search: „OBD 2“) or from your specialised dealer.
j Install the software on your PC or laptop.
Follow the installation instructions of the
software.
System requirements:
Windows 98, Processor min. 133 MHz
Windows ME, Processor min. 150 MHz
Windows 2000, Processor min. 133 MHz
Windows XP, Processor min. 300 MHz
Windows Vista, Processor min. 1 GHz
Windows 7
ATTENTION! The software on the enclosed CD is
only compatible with the above mentioned op-
erating systems.
Maintenance and care
The device is maintenance free.
WARNING!
Before cleaning always separate
the device from the power supply of the vehicle.
To do this, pull out the OBD II connection plug
4
.
j Clean the device and the connection cable
4
regularly with a dry cloth. Never use solvents
or other aggressive agents. Do not use any
fluids to clean the device.
j Do not use hard brushes or metallic objects.
If really dirty, clean the device with a slightly
damp cloth. Always completely dry the
device after cleaning
Service
WARNING!
Leave the repair of the
device to qualified technical personnel to
repair. Thus the safety of the device is guaran-
teed and maintained.
WARNING!
Leave the exchange of the
plug or the connecting cable always to quali-
fied technical personnel. Thus the security of
the equipment is guaranteed and maintained.
Warranty
The general guarantee conditions refer to
production and material defects.
If the device is faulty, bring it to your specialist
dealer respectively back to the sales office. In
order to accelerate the warranty and repair work
on the device, you need the following:
- A copy of the receipt (delivery note, bill)
with the acquisition date.
- Reason for the complaint or description of
the error.
Disposal
The packing consists of pollution free materials,
which can dispose of you over the local recy-
cling stations.
Do not throw electrical appliances
into the domestic waste!
To Next Page
Loading...