AEG PROTECT 1 Series - Connection of the Battery Cubicle PROTECT 1.100 BP

35
5.4.1 Connection of the Battery Cubicle PROTECT 1.100 BP
This battery cubicle is completely preconfigured. The
connection to the UPS unit is ready to be plugged in as a result
of the supplied battery connection cable.
PROTECT 1.100 with 1 battery unit PROTECT 1.100 BP
i
PROTECT 1.100 BP is only intended for connection
to the UPS type PROTECT 1.100.
Connect further battery cubicles of identical design (!) to the
second battery connection socket of the neighbouring battery
cubicle. Insert the battery connection plugs quickly and firmly
into the battery connectors.