41
Regulating the suction power
The suction power can be decreased by
actuating the suction power regulator located
on the handle, e.g. when vacuuming curtains.
Slider for regulating the suction power
– closed = full suction power
– open = decreased suction power
After dry vacuuming
0 Turn the rotary switch to ”0” and disconnect the
power plug.
Coil the cable in large loops and hang it on the
cable cradle located on the carry handle.
The vacuuming pipe can be hung on the
mountings on the motor head together with the
nozzle and hose.
Empty the dust container if required; however, if no paper filter is
being used, empty it as soon as the dust container is half full at the
latest. If you are vacuuming with a paper filter, the change should be
made when the nozzle noticeably begins to pick up less dirt.
To empty the container, release the two vice action latches and lift off
the motor head.
Empty the dust container into a rubbish bin.
Normal dust from housecleaning can easily be disposed of together
with the household waste.
To Next Page
Loading...
Need help?
General
