37
;
This appliance conforms with the following EU Directives:
• 73/23/EEC dated 19.02.1973 – Low Voltage Directive
• 89/336/EEC dated 03.05.1989, (including Modification Directive
92/31/EEC) – EMC Directive.
Readying the appliance for use
Mounting the bottom rollers
The bottom rollers are enclosed loosely for
packaging-related reasons. They are however
easy to assemble:
Pull the two vice action latches outwards and
lift off the motor head.
0 Remove the detergent tank from the dust
container.
0 Position the dust container with its opening
downwards.
To facilitate assembly, lightly grease the metal
pins that belong to the bottom rollers.
First push the metal pins into the base of the
dust container and then press it and the rollers
together as far as they will go.
To Next Page
Loading...
Need help?
General
