39
Connecting the vacuuming hose and vacuuming pipes
0 Insert the hose inserts into the suction hole as in
the picture and turn it to the right until it locks
into place.
To remove the vacuuming hose, twist the hose
inserts to the left and remove.
At the other end of the vacuuming hose, first
connect the vacuuming pipe without hook-in
pins and then the one with pins; do this in such a way that the hook-in
pins are pointed backwards when in the operating position.
After this the carpet nozzle or the accessory of choice can be attached.
Working with the nozzles when dry vacuuming
The nozzles are all attached to the vacuuming pipe by pressing and
twisting and are removed by pulling and twisting.
Universal flooring nozzle’s carpet nozzle
For cleaning carpeting and hard flooring.
The switch-over buttons can be adjusted by foot
to suit the type of flooring.
for carpeting
Press the carpeting symbol
- brush bristles are retracted
for smooth flooring
Press the smooth flooring symbol
- brush bristles are lowered
Upholstery nozzle
For vacuuming all types of upholstered
furniture, mattresses etc.
To Next Page
Loading...
Need help?
General
