Package contents:
1. Garage Door Controller. 2. Sensor.
3. 5V DC Adapter.
4. USB Cable.
5. Switch Cable (×2).
6. Screw (×6).
7. Back Mount Plate.
8. Fast Wiring Clip (×2). 9. Double-Sided tape.
Important safety information.
Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited
may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and / or reseller will not be
held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.
Garage Door Controller is intended for indoor use in dry locations only. Do not use in damp, moist, and / or wet
locations.
Contains small parts; keep away from children.
Quick start.
1. Power on your Garage Door Controller.
To Next Page
Loading...
