Aeon Labs Aeotec Nano Dimmer User Manual

25/04/2017 15)43Nano Dimmer user guide. : Aeotec by Aeon Labs
Page 1 sur 11https://aeotec.freshdesk.com/support/solutions/articles/6000162176-nano-dimmer-user-guide-
Nano Dimmer user guide.
Modified on: Thu, 23 Feb, 2017 at 1:38 PM
Aeotec Nano Dimmer user guide.
Aeotec Nano Dimmer has been crafted to power connected lighting using Z-Wave Plus (http://aeotec.com/z-wave-
plus). It is powered by Aeotec’s Gen5 (http://aeotec.com/z-wave-gen5) technology. You can find out more about
Nano Dimmer (http://aeotec.com/z-wave-light-dimmer-switch) by following that link.
To see whether Nano Dimmer is known to be compatible with your Z-Wave system or not, please reference our Z-
Wave gateway comparison (http://aeotec.com/z-wave-gateways) listing. The technical specifications of Nano
Dimmer (https://aeotec.freshdesk.com/solution/articles/6000165398-nano-dimmer-technical-specifications) can be
viewed at that link.
Familiarize yourself with your Nano Dimmer.

Aeon Labs Aeotec Nano Dimmer Specifications

General

Brand	Aeon Labs
Model	Aeotec Nano Dimmer
Category	Dimmer
Language	English

Summary

Nano Dimmer Overview and Familiarization

Familiarize Yourself with Nano Dimmer

Introduction to the Aeotec Nano Dimmer, its Z-Wave capabilities, and Gen5 technology.

Nano Dimmer Installation Guide

Wire Connection Ports and Terminals

Explanation of the different wire connection ports and terminals on the Nano Dimmer device.

Circuit Breaker and Wire Preparation

Safety instructions to shut off power and prepare connection wires for installation.

2-Wire System Wiring Diagram

Illustrates the wiring for a 2-wire system, including notes on load compatibility and bypass use.

Manual Switch Wiring Diagrams

Diagrams showing how to wire 2-way, momentary, and SPDT switches for external control.

3-Wire System Installation Details

Step-by-step guide for live, neutral, load, and switch connections in a 3-wire setup.

Gang Box Mounting Instructions

Guidance on positioning wires, the antenna, and mounting the Nano Dimmer within the gang box.

Quick Start: Adding to Z-Wave Network

Inclusion via Internal Button

Process for adding the Nano Dimmer to a Z-Wave network using the device's action button.

Inclusion via External Switch

Process for adding the Nano Dimmer to a Z-Wave network using an external manual switch.

Z-Wave Network Removal Procedures

Exclusion via Internal Button

Steps to remove the Nano Dimmer from a Z-Wave network using its action button.

Exclusion via External Switch

Steps to remove the Nano Dimmer from a Z-Wave network using an external switch.

Advanced Nano Dimmer Functions

External Switch Mode Configuration

How to set or auto-detect the mode for external switch control.

Touch Panel and Energy Monitoring

Using the touch panel for control and monitoring energy consumption data.

Security, Reset, and Safety

Secure and Non-Secure Z-Wave Inclusion

Guide to including the Nano Dimmer as a secure or non-secure device.

Resetting to Factory Defaults

Instructions for performing a factory reset on the Nano Dimmer.

Installation and Usage Warnings

Critical safety warnings regarding junction box size, conductors, and electrical shock.