APPENDIX A
iii
Int
Drt
Addr
LOre
This is the integral rate, in minutes,
for the feedback of the controller. It is
adjusted with the and . Press
ENTER to accept changes.
This is the derivative rate in %
/.1°/sec. This adjusts response time
to temperature changes at the outlet
of the unit.
This displays the address for the
controller. It is used for external
communication with a computer.
This changes the local/remote status
of the controller. In local mode all
external computer write commands
are ignored. Read commands still
function. In remote both read and
write comands from an external
computer will function.
To Next Page
Loading...
