APPENDIX B
vi
TEMPERATURE CONTROLLER QUICK REFERENCE
PROGRAMMING GUIDE
The following is a “How To” guide that quickly shows how to access menu levels and
their parameters, and how to make changes to them.
• PRIMARY MENU to SECONDARY MENU
Press ENTER and the
⇑
arrow key.
The display will indicate:
• SECONDARY MENU to PRIMARY MENU
Press INDEX and the
⇓
arrow key.
The display will indicate:
NOTE:
When in the Secondary menu the first menu parameter, (Func), must be displayed in
order to switch to another menu.
NOTE:
The number 120, shown above, is arbitrary. This number is dependent on the actual
outlet water temperature of the unit being serviced.
To Next Page
Loading...
