AERMEC VENICE 020 - Page 14

14
while the lower axis recommends
the percentage value of glycol
necessary to produce water at the
desired temperature.
Remember that the initial
measurements “EXTERNAL
AIR TEMPERATURES” and
“TEMPERATURE OF WATER
PRODUCED”, are not directly linked
to each other. Therefore, it will not
be possible to enter the curve of one
of these measurements and obtain
the corresponding point on the other
curve.

~

~
~
~
~
~
~
~
~
~~
~








¤
¤~
¤~
¤
¤
¤
¤
¤
~~

     
¤




~
~
~~~
~~
~
~~
~
¤
=[>G^
=[>GY
=[>G^Û¨G\:©
=[>HÛ¨G\:©
=[>;h=Û¨]©
=[>;h=Û¨\©
=[>;h=Û¨[©
=[>;h=Û¨Z©
=[>;h=Û¨Y©
=[>H=
temp. of water produced
external air temperature
Glycol