To Next PageTo Next Page
Need help?Do you have a question about the AERMEC ANL Series and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Series | ANL Series |
| Refrigerant | R410A |
| Type | Air-to-Water |
| Configuration | Monobloc |
| Power Supply | 400V / 3Ph / 50Hz |
| Operating Temperature Range (Heating) | -15°C to 35°C |
| Energy Efficiency Ratio (EER) | 2.8 - 3.1 |
Instructions for preserving the installation manual and supplementary documentation for the system user.
Essential safety guidelines and installation standards to be followed by qualified technicians.
Criteria for choosing the location, including base support, safe distances, and access.
Guidelines for lifting, placing, and securing the unit, ensuring it is level and stable.
Detailed dimensions, weights, and center of gravity data for ANL 020-025 units.
Detailed dimensions, weights, and center of gravity data for ANL 050-090 units.
Detailed dimensions, weights, and center of gravity data for ANL 102-202 units.
Specific dimensions for ANL 020-025 models in C version.
Specific dimensions for ANL 102-202 models in D/DA/HD/HDA versions.
Diagrams and components for standard, P/N, HP/HN, and A/Q/HA/HQ hydraulic circuits.
Example of a system for domestic hot water production with ANL50H and VMF-ACS.
Procedures for charging the system with water and draining it.
Instructions for connecting the unit to the power supply network, including safety requirements.
Table detailing electrical data, power supply, and cable cross-section recommendations.
Initial steps before unit start-up, including agreement with technical assistance.
Covers preliminary checks before powering up and checks during operation.
Instructions for changing the unit's operating season (cooling/heating).
Details on cooling/heating setpoints, compressor delay timers, and pump operation.
Information on anti-freeze and water flow alarms.
Annual checks for hydraulic, electric, and refrigerant circuits, plus mechanical checks.
Guidelines for special maintenance and proper disposal of the unit.
Instructions for accessing and modifying user menu parameters.
Instructions for accessing and modifying installer menu parameters, including system type.
