AERMEC VENICE - Programming Menu

23/05 – 4840212_00 19
Programming menu
1 Category PLt (system): identied by the code
Uxxx, these are all parameters relating to the
regulation and management of system utilities
2 EEV category (ExV valve): identied by the code
Exxx, these are all parameters related to the reg-
ulation and management of electronic expan-
sion valves
3 Category CMP (Compressors): identied by the
code Cxxx, these are all parameters related to
the regulation and management of compressors
and cooling circuits
4 Category Src (source): identied by the code Sxx,
these are all parameters related to the regulation
and management of the condensation / source
5 Category Clc (Clock): identied by the code Haxx,
these are the date/time setting parameters
6 Category Hst (Alarm History): access to alarm
history. Each event is alternately described by
date (in DD MM format) and time (in hh:mm
format)
7 Log Out command to leave the category
8 ESC command to return to standard display view
1
2 3
5 64
7
8
 Note:
— The service password also gives access to user parameters;
— If no key is pressed, the terminal automatically returns to the standard display view after about 3 minutes.