AERMEC VENICE - Parameter List; Probe Parameters; Compressor Parameters; Setting Parameters

20 23/05 – 4840212_00
4 PARAMETER LIST
 Note: The values shown in the windows are the default values.
Probe parameters
Visualisation Parameter Default
rUSr
Water inlet -
dUSr
Water outlet temperature -
dSt1
Condensation probe -
Sprb
External air temperature probe -
Compressor parameters
Visualisation Parameter Default
H1C1
Compressor 1 hour counter 0
H1C2
Compressor 2 hour counter 0
H2C1
Compressor 3 hour counter 0
H2C2
Compressor 4 hour counter 0
HuP1
Evaporator pump hour counter 0
HsP1
Condenser pump hour counter 0
Setting parameters
Visualisation Parameter Cooling Heating
SEtC
Set point summer 11°C 11°C
SEtH
Set point winter 40°C 46°C
U039-U042
Dierential 3°C 2°C
U023
Second summer set point from external contact 12°C 12°C
U024
Second winter set point from external contact 40°C 40°C
Attention: If you set the controller in the “dierential” parameter, the following formula must be executed to enter the correct value: Kp= 100 / Dierential.