EDACS REPEATERS
2-10
Autorun parameters
The AUTORUN PARAMETERS menu, shown in Fig. 2-9, allows you access to the parameters of
each of the tests that are available within the EDACS Repeater system. The default parameters for
each test are listed in Chapter 1, General Information.
Fig. 2-9 Autorun parameters menu
SYSTEM TYPE
There are a number of different system types (or Variants) that can be selected from within the
SYSTEMS PARAMETERS menu. The operating channels of each system are allocated by the
appropriate authority.
The provision of four EDACS system types, with an edit facility, allows access to these
parameters. Once set up, each system type remains available for future use.
To Next Page
Loading...