Aeroflex 2945A - Performance Data; General EDACS System Information

EDACS REPEATERS
1-3
Performance Data
General EDACS system information
Since EDACS systems have no common frequency plan, four user-defined variants are provided.
These are configurable, as described in Chapter 2.
FM voice deviation
5.0
kHz
Data type non return to zero FSK
Data rate 9600 bits per second (wideband), 4800 bits per second (narrowband)
Data deviation 3.0 kHz
System parameter settings
System type As selected. Default Repeater 1.
Control channel 1 to 24 (system dependent). Default 1.
Tx Polarity AUTO, NORMAL or INVERTED. Default AUTO.
Radio parameter settings
Testset logical ID Format xxxx Default 0001
Radio logical ID Format xxxx Default 0001
Group ID Format xxx Default 001
Display format settings
Display format SUMMARY or FULL. Default SUMMARY.
Pause mode ALWAYS, MANUAL ONLY or ON FAILURE. Default MANUAL ONLY.
Print ON, OFF Default OFF
Program settings
Test programs QUICK TESTING
GENERAL TESTING Default QUICK TESTING
USER DEFINED TEST