AES Dilumat S - Page 59

DILUMAT S® MA108201-C
59
Adjustment Report Check Report
CALIBRATION REPORT -----------------
01 - DILUMAT S ID : XXXXXXXX (8
characters)
02 - Last calibration : XXXX/XX/XX
------------------------------------
06 - User ID : XX
07 - Date : (YYYY/MM/DD) :
XXXX/XX/XX
08 - Time : (24h) : XX:XX:XX
16 - Set weight (g) : XXXX.XX
17 - Checked weight (g) : XXXX.XX
18 - Accuracy (%) : XX.X
19 - Calibration : OK
CHECK REPORT -----------------------
01 - DILUMAT S ID : XXXXXXXX (8
characters)
02 - Last calibration : XXXX/XX/XX
------------------------------------
06 - User ID : XX
07 - Date : (YYYY/MM/DD) :
XXXX/XX/XX
08 - Time : (24h) : XX:XX:XX
16 - Set weight (g) : XXXX.XX
17 - Checked weight (g) : XXXX.XX
18 - Accuracy (%) : XX.X
20 - Check : OK
Definition of Report Data
01 Dilumat s ID Serial number for the device
02- Last calibration Date of last calibration
03- Dilution Result Result of the dilution
04- Dilution ID ID for the dilution (counter)
05- Dispensing Id ID for the dispensing (counter)
06- User ID ID for the user
07- Date (YYYY/MM/DD) Date of operation (yyyy/mm/dd format)
08- Time (24H) Time of operation
09- Dilution factor Dilution factor
10- Sample weight (g) Weight of the sample in grams
11- Dilution weight (g) Final dilution weight in grams
12- Accuracy (%) Accuracy of the dilution or dispensing
13- Sample ID
Bar code ID for the sample or sample ID (available only with the bar
code reader or keypad option)
14- Set weight (g) Weight of the dispensing set in grams
15- Dispensed weight (g) Weight of the dispensed diluent in grams
Adjustment and Check Report Data
16- Set weight (g) Weight of the calibration set in grams
17- Checked weight (g) Actual weight of the calibration in grams
18- Accuracy (%) Accuracy of the calibration or verification
19- Calibration Conclusion of the calibration
20- Check Conclusion of the verification
Simulation Report Data
21- Set cycles Number of test cycles programmed
22- Completed cycles Number of test cycles completed
23- Counter 1 Number of dilutions completed since the last reset
24- Counter 2 Number of dispensing operations completed since the last reset
25- Counter 3 Number of hours and minutes powered on
26- Status Conclusion of the test phase
Note:
- These reports are published only in English.
- KO indicates a failure.