31
in.xm
TM
RH - ID
Incompatibility between the in.xm™ and in.therm™ models
The North American version of the in.xm™ pack can only be
connected with the North American version of the in.therm™
heater. The same applies to the European version of both devices.
• The RH-ID message indicates that the European version of the
in.therm™ heater (in.therm™ CE) has been connected to the
North-American version of the in.xm™ pack (in.xm™ UL) or
vice versa.
To correct the situation:
• Swap the in.therm™ or the in.xm™ for the appropriate version.
RH corrective actions
To Next Page