38
in.xm
TM
Testing the ozonator
• Make sure ozonator is connected properly.
• Press and hold the change button until the message O3 fl ashes
on display.
• Then, the system activates the pump associated to the ozonator
(P1 or CP) followed by the ozonator output.
Important: if the spa is equipped with the in.zone™ corona
discharge ozonator, its LED indicator lights up to warn that the
ozonator output has been activated.
testing the ozonator
Smart Winter Mode not a bug but a feature!
Our Smart Winter Mode protects your spa from water cold enough
to freeze the pipes by automatically turning pumps on for one
minute several times a day to prevent water from freezing in pipes.
To Next Page
Loading...