20
Information Page
The OFL250 generates and displays the information page with every OTDR Test mode selected.
This page displays how the test was created.
• You may change the Index of Refraction and Launch Cable to correct locations in the Event
Table after the test is complete.
• You may also change Thresholds and then recalculate the event table by pressing the CALC
EVENT soft key.
Index 1.4677
BC, dB -77.0
Launch Cable 150.0 m
Receive Cable 0.0 m
Events Auto
End Loss, dB 3.1
Event Loss, dB 2.00
Event Reflectance -50.0
Mode: Full Auto Pulse: 30 ns
Range: 500m Avg Time:10 sec
Filter: Off Averages: 2424
WAVECALC EVENT
New Trace
15501310
Press to recalculate the
Event Table.
For dual-wave tests, press to
toggle the displayed test results.
Use the Left/ Right arrow key
to change the highlighted
parameter.
Use the Left/ Right arrow key
to change the highlighted
parameter.
These fields show the current
test data.
To Next Page
Loading...
