23
The Save As page allows you to save current test results and create new folders if needed. This
page allows you to review and if needed change the file and folder names each time test results
are saved.
1. To display the Save As page, press the Save key or the Save As soft key when it appears.
2. When the Save As page is displayed, use keys to indicate (highlight) any character
position within the Folder name field or File name field.
3. Use keys to change the highlighted character.
• If the Folder name is edited to a name that already exists, then pressing the Save (soft or
hard) key will save the current test results in this folder and make this folder current.
• If the File name is edited to a name that already exists in the current folder, then
pressing the Save key will cause the OFL250 to display “Overwrite file?”. Press Cancel
to stop the save process or Yes to overwrite the previously saved file.
• If the Folder name is edited to a new name, then pressing the Save key will cause the
OFL250 to create a new folder of this name. Note: This is the only way to create new
folders!
File Manager – Save As Page
Folder:
NEWFOLDER001
File name
CABLE000_001
FilesCancelSave
/NEWFOLDER000/CABLE000_001
Save As...
Saving & Reviewing Test Results
Press to display the File
Manager page.
Press to save
with the currently
displayed Folder/File
name.
Folder name FIELD - user set.
Use Up & Down Arrow keys to
change.
File name FIELD - user set.
Use Up & Down Arrow keys to
change.
Current Folder/File name that
will be used next time you
press the Save soft key.
Highlighted block indicates the
currently selected character.
Press to exit Save As page.
Fiber number - user set, will
auto increment.