2 / 34
is because the charge stored in capacitors may provide a risk of electric shock or a
risk of electrical energy-high current level.
5. The enclosure of Inverter can become hot during operation. To reduce the risk of
injury, do not touch the cover, heat sink at the back of the PV-Inverter or nearby
surfaces while Inverter is operating.
6. Do not use the equipment for purposes other than those described in this manual.
7. Both the inverter and associated transport packaging are mainly made of
recyclable raw materials. Please ensure that the used device and any relevant
accessories are disposed of in accordance with applicable regulations.
2.2 Explanations of Symbols
Danger of Electric Shock.
The inverter is directly connected with the public grid. All work on the inverter
must be carried out by qualified personnel only.
Beware of hot surface.
The inverter can become hot during operation. Do not contact the device
during operation.
Caution, risk of electric shock
Energy storage timed discharge, time to be indicated adjacent to the symbol.
Caution, Danger.
This device directly connected with electricity generators and public grid.
Do not dispose of this device with the normal domestic waste.
Without Transformer.
This inverter does not use transformer for the isolation function.
CE mark.
The inverter complies with the requirements of the applicable EC guidelines.
C-Tick mark.
The inverter complies with the requirements of Australian Communications
Authority guidelines.
Notes, Important.
Non-adherence to these instructions may adversely affect the operating
convenience or functionality of the device.
To Next Page
Loading...
Need help?
General
