4 / 34
3.2 Identifying the Inverter
You can identify the inverter using the type label. Information such as serial number
(Serial No.) and type of the inverter, as well as device-specific characteristics are
specified on the type label. The type label is on the right side of the enclosure.
4 Mounting
DANGER!
Danger to life due to potential fire or electric shock.
Do not install the inverter near any inflammable or explosive items. The inverter will
be directly connected with high voltage power generation device. The installation
must be performed by qualified personnel only in compliance with national and local
standards and regulations.
CAUTION!
Danger of burn injuries due to hot enclosure parts.
•Install the inverter so that it cannot be touched inadvertently.
Risk of injury due to the heavy weight of the inverter.
• Take the inverter's weight of approx. 16 kg into account for mounting.
4.1 Selecting the Appropriate Mounting Location
Consider the following points when selecting where to install:
• The mounting method and location must be suitable for the inverter's weight and
dimensions.
• Mount on a solid surface. But do not mount the unit on plasterboard walls or
similar in order to avoid audible vibrations for the inverter can make noises when in
use.
To Next Page
Loading...
Need help?
General
