How to prevent shadows from static images on AG Neovo X-22E Monitor?
To address faint shadows from a static image appearing on the screen of your AG Neovo Monitor: turn off the LCD display for extended periods of time. Alternatively, use a screen saver or a black and white image and run it for extended periods of time.
What to do if there is no audio output from my AG Neovo X-22E?
If you're experiencing no audio output from your AG Neovo monitor, here's what you can check: * Verify the volume isn't set to 0. Consult page 17 or 36 for volume settings. * Ensure the AUDIO setting isn't set to OFF in AUDIO SETTING (see page 36). * If using VGA or DVI input, check the audio settings on your computer. * For HDMI or DP input, select the correct audio input source (see page 36).
Why is the LED indicator on my AG Neovo X-22E Monitor AMBER?
If the LED indicator on your AG Neovo monitor is amber, check the following: * Ensure your computer is turned on. * If the computer is in standby mode, move the mouse or press any key to wake it up.
How to fix blurry text on my AG Neovo X-22E Monitor?
If the text displayed on your AG Neovo monitor is blurry: * For VGA input, touch the button on the keypad to auto-adjust the display. * Adjust the IMAGE SETTING (see page 28).
How do I correct the image position on my AG Neovo X-22E Monitor?
To correct an incorrect image position on your AG Neovo monitor, adjust the H. POSITION and V. POSITION values. See IMAGE SETTING on page 28.
Why PIP mode does not work on AG Neovo Monitor?
If PIP mode does not work on your AG Neovo Monitor, the main and sub input source signals are not compatible to be displayed together in PIP mode. Check the PIP Compatibility Table for details.
How to correct image position on AG Neovo X-22E Monitor?
If the image position on your AG Neovo Monitor is incorrect, adjust the H. POSITION and V. POSITION values.
What to do if the OSD menu can't be called out on AG Neovo X-22E?
If the OSD menu on your AG Neovo Monitor can't be called out, the OSD is likely locked. To unlock it, see page 17.
What to do if there is no audio output from AG Neovo X-22E Monitor?
If there is no audio output from your AG Neovo Monitor, first, ensure the volume isn't set to 0. Next, verify that the AUDIO setting isn't set to OFF. If you're using VGA or DVI input, check the computer's audio settings. For HDMI or DP input, select the correct audio input source.
Why is there dew formed on or inside the LCD display of my AG Neovo X-22E?
Dew forming on or inside the LCD display of your AG Neovo monitor typically occurs when the monitor is moved from a cold to a hot room. To resolve this, do not turn on the LCD display; wait for the dew condensation to disappear.
To Next Page
General
