Step 6: perform a quality control
At the NX workstation:
1. Select the image on which quality control is to be performed.
2. Prepare the image for diagnosis by using e.g. L/R markers or annotations.
3. If the image is OK, send the image to a hardcopy printer and/or PACS
(Picture Archiving and Communication System).
Connecting the NX workstation to the hospital network
If the DR Detector communicates via the internal wireless adapter of the
workstation, switch the NX Workstation to the hospital network to send
images to the printer or to the PACS archive.
Related Links
Using the Windows wifi settings to switch between the wireless DR detector and
the wireless hospital network on page 94
DX-D 40C, DX-D 40G | Getting started | 79
0290B EN 20190401 1627
To Next Page
Loading...
