AGFA DX-D 35C User Manual

DR Detector Calibration
Key User Manual
0134I EN 20210924 1204

AGFA DX-D 35C Specifications

General

Interface	Gigabit Ethernet
A/D Conversion	16-bit
Technology	Digital X-ray
Sensor Technology	Amorphous Silicon (a-Si)
Active Area	35 x 43 cm (14 x 17 inch)

Summary

Calibrating the DR Detector

About Gain Calibration

Explains that regular calibration ensures constant image quality and corrects sensitivity deviations and non-uniformity.

Calibration Frequency

Details the required recalibration intervals for DR Detectors based on usage and model type.

Calibration Workflow

Provides an overview of the calibration process, listing key steps and sequences for different detector models.

Required material

Lists the necessary calibration filters and blocks required for different DR detector models.

Preconditions

Lists the necessary steps and checks to perform before starting the DR detector calibration procedure.

Procedure

Outlines the step-by-step process for initiating and performing the DR Detector calibration using the software tool.

XD 10, XD+10, XD 14, XD+14, XD 17 and XD+17 Exposure Sequence

DR 10s and DR 14s Exposure Sequence

DR 10e C, DR 14e C and DR 17e C Exposure Sequence

DR 18M and DR 24M Exposure Sequence

DX-D 10C, DX-D 10G, DX-D 20C, DX-D 20G Exposure Sequence

DX-D 25C Exposure Sequence

DX-D 30C and DX-D 35C Exposure Sequence

DX-D 40C and DX-D 40G Exposure Sequence

DX-D 45C, DX-D 45G, DX-D 60C and DX-D 60G Exposure Sequence

Fixed DR Detector (4343R, Pixium RAD 4343) Exposure Sequence

Fixed DR Detector (Pixium RF4343 FL) Exposure Sequence

Problem solving

DR Calibration Tool Stalls

Generator error

Generator controls are disabled