Password requested when connecting to the DR
Detector via the wireless network
Details When connecting to the DR Detector by selecting it
from the list of available wireless networks, a password
is requested.
Cause The password was removed from the wireless network
settings stored by the operation system.
Cause The DR Detector is already configured on another NX
Workstation, to communicate via the internal wireless
adapter of the workstation.
Brief Solution Contact your local service representative to reset the
password or to investigate alternatives for sharing the
DR Detector between multiple NX Workstations.
DX-D 40C, DX-D 40G | Problem solving | 99
0290B EN 20190401 1627
To Next Page
Loading...
